solar joint harness 1000V IP67 solar cross wire 1000V 2 in 1 T branch connector

MC4 Y Adapter solar panels in parallel

How to Install MC4 Connectors

Step 1: Strip the solar panel cable to expose approximately 3/8＂of the stranded copper cable

Step 2: Crimp terminal well,and put the terminal to the connector directly.

Step 3: Using solar spanner to slide the strain relief/ grommet and nut back onto the MC4 connector. Firmly hand tighten the nut.

Step 4: Well done

Warning

1. When the surface of a solar panel is exposed to sunlight, a DC voltage appears at the output terminals turning it into a live voltage source that may produce electrical shock.

2. To avoid any electrical shock hazard during assembly/installation, make sure that the solar panel is not exposed to sunlight or is covered to block any solar irradiation.

Product Description

mc4 Y Adapter connector is Compatible with multi contact 4 connector,suitable to solar cable
2.5 mm²,4mm² and 6mm² in solar connection project.connecting solar panels in series or parallel.quickly and
reliable connection of the solar cables to the photovoltaic system(solar panels, converters).

• Compatible with MC4 cable coupler solar connector PV-KBT4/KST4.

• 15 Years of production experience in solar connectors

• TUV approved & Quick and easy to install

• Protection class IP67 Suitable for outdoor harsh environments

• Stable connection & Reducing maintenance cost

• Free Sample is available

Specification Of mc4 Y Adapter connector

 

mc4 Y Adapter connector
	Product NO.	SY-BA21-A/B
	Insulation material	PPO
	Rated Voltage	TUV 1000 DC/ UL 600V DC
	Rated Current	20A-40A
	Test voltage	6KV(50Hz,1Min)
	Contact material	copper, tin plated
	Contact resistance	less than 0.5 m ohm
	Degree of protection	IP67
	Pin dimension	4.0 MM
	Compatible Solar cable	2.5/4.0 /6.0 mm² (14/12/10 AWG)

DRAWING of mc4 multi branch connector(PLEASE CONTACT US)