Sales & Support: Request A Quote

PPO Insulated MC4 Y Branch Connector IP67 For Outdoor Harsh Environments

PPO Insulated MC4 Y Branch Connector IP67 For Outdoor Harsh Environments

Product Details:

Place of Origin: China
Brand Name: Sunyo
Certification: TUV Rhineland, RoHS, CE etc.
Model Number: SY-CM21/AB

Payment & Shipping Terms:

tr>
Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: 50pcs / opp
Delivery Time: 7-35 days
Payment Terms: L/C, D/A, D/P, T/T, MoneyGram, Western Union
Supply Ability: 10000pcs / Week
Contact Now
Detailed Product Description
Test Voltage:6KV(50Hz,1Min)Degree Of Protection:IP67
Contact Resistance:10×38 Mm, 1-20AContact Material:Less Than 0.5 M Ohm
Pin Dimension:4.0 MMRated Current:20A-40A
Insulation Material:PPO


mc4 y connector connecting solar panels in parallel or series

 

 

Product Description

 

Dongguan Sunyo-Photovoltaic Co., Ltd.

mc4 y connector is Compatible with multi contact 4 connector,suitable to solar cable
2.5 mm2,4mm2 and 6mm2 in solar connection project.connecting solar panels in series or parallel.
quickly and reliable connection of the solar cables to the photovoltaic system(solar panels, converters).

  • Compatible with MC4 cable coupler solar connector PV-KBT4/KST4.

  • 15 Years of production experience in solar connectors

  • TUV approved & Quick and easy to install

  • Protection class IP67 Suitable for outdoor harsh environments

  • Stable connection & Reducing maintenance cost

  • Free Sample is available

Specification Of mc4 y connector

 

 

mc4 y connector

 

 

PPO Insulated MC4 Y Branch Connector IP67 For Outdoor Harsh Environments

Product NO.SY-CM21-A/B
Insulation materialPPO
Rated VoltageTUV 1000 DC/ UL 600V DC
Rated Current20A-40A
Test voltage6KV(50Hz,1Min)
Contact materialcopper, tin plated
Contact resistanceless than 0.5 m ohm
Degree of protectionIP67
Pin dimension4.0 MM
Compatible Solar cable2.5/4.0 /6.0 mm² (14/12/10 AWG)

 

Drawing of mc4 y connector


 

 

How to Connect MC4 Connectors?

 

Components

 

PPO Insulated MC4 Y Branch Connector IP67 For Outdoor Harsh Environments1. Female Insulated Connector Housing
2. Male Insulated Connector Housing
3. Housing Nut with internal rubber bushing/cable gland (seals wire entry)
4. Female Mating Contact
5. Male Mating Contact
6. Wire Crimp Area
7. Locking Tab
8. Locking Slot – Unlock Area (press to release)

 

Assembly

 

Dongguan Sunyo-Photovoltaic Co., Ltd.
’S MC4 connectors are compatible for use with AWG #10, AWG #12, or AWG #14 wire/cable with an outer insulation diameter between 2.5 and 6.0 mm.

1) Strip 1/4d of the insulation from the cable end to be terminated with the MC4 connector using a wire stripper. Be careful not to nick or cut the conductor.

2 )Insert the bare conductor into the crimping area (Item 6) of the metallic mating contact and crimp using a special purpose crimping tool. If a crimping tool is not available the wire may be soldered into the contact.

3 )Insert the metallic mating contact with the crimped wire through the Housing Nut and rubber bushing (Item 3) and into the insulated housing, till the metallic pin fits snug into the housing.

4) Tighten the Housing Nut (Item 3) onto the connector housing. When the nut is tightened, the internal rubber bush is compressed around the outer jacket of the cable and thus, provides water-tight sealing.

 

Installation

 

Push the Two Connector pairs together such that the two locking tabs on the MC4 Female Connector (Item 7) align with the two corresponding locking slots on the MC4 Male Connector (Item 8). When the two connectors are coupled, the locking tabs slide into the locking slots and secure.

To uncouple the two connectors, press the ends of the locking tabs (Item 7) as they appear in the open locking slot (Item 8) to release the locking mechanism and pull the connectors apart.

Make sure that no current is flowing when uncoupling is attempted.

 

Warning

 

1. When the surface of a solar panel is exposed to sunlight, a DC voltage appears at the output terminals turning it into a live voltage source that may produce electrical shock.

2. To avoid any electrical shock hazard during assembly/installation, make sure that the solar panel is not exposed to sunlight or is covered to block any solar irradiation.


Tag:
Contact Details
Dongguan Sunyo-Photovpltaic Co., Ltd.

Contact Person: Mandy

Send your inquiry directly to us (0 / 3000)

Best Products
Other Products